display cpu monitor history

Function

The display cpu monitor history command displays historical information about CPU overloading status.

Format

display cpu monitor history [ slot slot-id ]

Parameters

Parameter Description Value
slot slot-id

slot id.

The value is a string of 1 to 31 case-insensitive characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name Operations
diagnose read

Usage Guidelines

Usage Scenario

To obtain historical information about CPU overloading status of a board, run the display cpu monitor history command. The obtained information helps locate faults.

Precautions

This command is supported only on the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display historical information about CPU overloading status.
<HUAWEI> display cpu monitor history
CPU Overload history:
System CPU use rate is : 99%
OverloadTime : 2020-03-14 03:27:25
--------------------------------
ServiceName         UseRate   
--------------------------------
SYSTEM              99%
CMF                  0%
UNKNOWN              0%
IP STACK             0%
AAA                  0%
RM                   0%
TNLM                 0%
LOCAL PKT            0%
SLA                  0%
VLAN                 0%
DEVICE               0%
ARP                  0%
ND                   0%
IFM                  0%
FIBRESM              0%
TUNNEL               0%
FEC                  0%
FEA                  0%
PNP                  0%
--------------------------------
Table 1 Description of the display cpu monitor history command output
Item Description
CPU Overload history

Historical information about CPU overloading status.

System CPU use rate is

CPU usage when the CPU was overloaded.

OverloadTime

Date and time when the CPU was overloaded.

ServiceName

Service name.

UseRate

CPU usage in each service.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >