The dhcpc option60 redefined command configures the Option 60 information for DHCP messages sent from a DHCP client.
The undo dhcpc option60 redefined command deletes the configured Option 60 information.
By default, if the Option 60 information is not configured in either the interface view or system view, the Option 60 information carried in the DHCP messages sent by a DHCP client is HUAWEI device model information.
100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE sub-interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, PW-VE sub-interface view, VE sub-interface view, VLANIF interface view, Sub-interface view, Management interface view
Usage Scenario
When a DHCP client applies to a DHCP server for an IP address, the DHCP client sends DHCP messages carrying Option 60. To configure the Option 60 information carried in the DHCP messages, run the dhcpc option60 redefined command. The DHCP server identifies different DHCP clients for differentiated processing based on the Option 60 information in received DHCP messages.
Precautions
If the Option 60 information is configured in both the system view and interface view, the configuration in the interface view takes effect.
If the Option 60 information is not configured in either the interface view or system view, the Option 60 information carried in the DHCP messages sent by a DHCP client is HUAWEI device model information.