dhcpv6 relay pd-route auto-save write-delay

Format

dhcpv6 relay pd-route auto-save write-delay delaytime

undo dhcpv6 relay pd-route auto-save write-delay [ delaytime ]

Parameters

Parameter	Description	Value
write-delay delaytime	Specifies a delay for writing the PD route user table into a file.	The value is an integer that ranges from 1 to 1440, in minutes. The default value is 5.

Parameter

Description

Value

write-delay delaytime

Specifies a delay for writing the PD route user table into a file.

The value is an integer that ranges from 1 to 1440, in minutes. The default value is 5.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

In prefix allocation scenarios, after the function of saving PD routes to a file is enabled, to reduce the impact on the system, the device writes the PD route user table into a file after a delay of 5 minutes when the entries are fully written into the non-volatile random access memory (NVRAM) by default. The delay can be configured based on the number of online users.

Example

# Set a delay for writing the PD route user table into a file during automatic file saving to 10 minutes.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 relay pd-route auto-save write-delay 10