display mpls te hot-standby state all

Function

The display mpls te hot-standby state all command displays the status of primary and backup LSPs in all hot-standby tunnels as well as the switching results.

Format

display mpls te hot-standby state all

display mpls te hot-standby state all verbose

Parameters

Parameter	Description	Value
verbose	Specifies to view the verbose information.	-

Parameter

Description

Value

verbose

Specifies to view the verbose information.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

The display mpls te hot-standby state all command displays the status of primary and backup LSPs in tunnels and the switching results.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about the primary and hot-standby CR-LSPs and the tunnel in use after a switchover on all tunnel interfaces.

<HUAWEI> display mpls te hot-standby state all
 (s): same path
--------------------------------------------------------------------------------
No.        tunnel name                    session id   switch result   overlap
--------------------------------------------------------------------------------
1          Tunnel100                      100          main LSP        no
2          Tunnel200                      200          hot-standby LSP no

**Table 1** Description of the **display mpls te hot-standby state all** command output
Item	Description
No.	Number.
tunnel name	Tunnel name.
session id	Tunnel ID.
switch result	CR-LSP switchover result: Main LSP: Data has switched to the primary CR-LSP. Hot-Standby LSP: Data has switched to a hot-standby CR-LSP. Best-Effort LSP: Data has switched to a best-effort path.
overlap	Whether the primary and backup LSPs overlap.