display memory-monitor information
Function
The display memory-monitor information command displays the memory overloading status of boards.
Usage Guidelines
Usage Scenario
When the memory usage is high, run the display memory-monitor command to check whether memory is overloaded. If memory is overloaded, the administrator can take action to reduce the memory usage and ensure that the device runs properly.
The display memory-usage command can be used to display the memory usage.
Precautions
In VS mode, this command is supported only by the admin VS.
Example
The actual command output varies according to the device. The command output here is only an example.
# Display the memory overloading status of a specified board on a device.
<HUAWEI> display memory-monitor information slot 1 Memory overload information -------------------------------------------------------------------- Slot Time State -------------------------------------------------------------------- 1 0000-00-00 00:00:00 Unoverload --------------------------------------------------------------------
| Item | Description |
|---|---|
| Slot | Slot ID. |
| Time | Date and time when memory is overloaded or not overloaded. The default value is 0000-00-00 00:00:00. |
| State | Memory overloading status:
|