display mpls te gmpls tunnel-interface last-error

Format

display mpls te gmpls tunnel-interface last-error [ gmpls-tunnel-name ]

Parameters

Parameter	Description	Value
gmpls-tunnel-name	Specifies the name of a GMPLS UNI tunnel.	The value is a string of 1 to 63 case-sensitive characters, spaces not supported.

Parameter

Description

Value

gmpls-tunnel-name

Specifies the name of a GMPLS UNI tunnel.

The value is a string of 1 to 63 case-sensitive characters, spaces not supported.

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
mpls-te	debug

Usage Guidelines

Usage Scenario

The display mpls te gmpls tunnel-interface last-error command displays last errors that occur on an ingress EN or are carried in packets sent by an egress EN of a GMPLS UNI tunnel.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display last errors that occur on a GMPLS UNI tunnel named toD.

<HUAWEI> display mpls te gmpls tunnel-interface last-error
 Tunnel Name: toD

    Error No.  : 1
    LSP Type   : Primary LSP               LSP ID     : 1.1.1.1:1:12
    Error Code : 2                         Occur Time : 2014-07-24 01:15:55.799
    Error Info : Path Err, Error Node 0.0.0.0, Error LsrId 1.1.1.1,
                 RSVP ErrCode 24: Routing problem,
                 RSVP ErrValue 5: No route,
                 RSVP failed to set up the LSP.

**Table 1** Description of the **display mpls te gmpls tunnel-interface last-error** command output
Item	Description
Tunnel Name	GMPLS UNI tunnel name.
Error No	Number of an error.
Error Code	Error code, uniquely specifying a type of error, in hexadecimal notation.
Error Info	Error information.
Error LsrId	Incorrect LSR ID.
LSP Type	LSP type: Primary LSP.
LSP ID	LSP ID.
Occur Time	Time when an error occurred.
RSVP ErrCode 24	RSVP error code.
RSVP ErrValue 5	RSVP error value.