display gvrp statistics

Function

The display gvrp statistics command displays GVRP information on a specific or all interfaces.

Format

display gvrp statistics [ interface { interface-name | interface-type interface-number } ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays GVRP information on a specific interface: <ifType> specifies the type of the interface. <ifNum> specifies the number of the interface. If interface <ifType> <ifNum> is not specified in the command, GVRP information on all interfaces is displayed.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
gvrp	read

Usage Guidelines

Usage Scenario

To check GVRP information on a specific or all interfaces, run the display gvrp statistics command. The information includes GVRP status, number of GVRP registration failures, source MAC address of the last GVRP PDU, and GVRP registration mode on an interface.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display GVRP information on GE 0/1/17.

<HUAWEI> display gvrp statistics
  GVRP statistics on port GigabitEthernet0/1/17
    GVRP status                     : Enabled
    GVRP registrations failed       : 0
    GVRP last PDU origin            : 0000-0000-0000
    GVRP registration type          : Normal

**Table 1** Description of the **display gvrp statistics** command output
Item	Description
GVRP status	GVRP status: Enabled. Disabled.
GVRP registrations failed	Number of GVRP registration failures.
GVRP last PDU origin	Source MAC address of the last GVRP PDU.
GVRP registration type	GVRP registration mode, which can be configured using the gvrp registration command. The following modes are available: Fixed. Forbidden. Normal.