display garp timer

Function

The display garp timer command displays values of GARP timers.

Format

display garp timer [ interface { interface-name | interface-type interface-number } ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays GARP statistics on a specific interface: <ifType>: specifies the type of the interface. <ifNum>: specifies the number of the interface.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
gvrp	read

Usage Guidelines

Usage Scenario

To check GARP timer values, run the display garp timer command. Note that:

If interface interface-type interface-number is not specified in the command, GARP timer values on all interfaces are displayed.
If interface interface-type interface-number is specified in the command, GARP timer values on a specific interface are displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display GARP timer values on the device.

<HUAWEI> display garp timer
 GARP timers on port GigabitEthernet0/1/17
    GARP JoinTime                : 80 centiseconds
    GARP LeaveTime               : 240 centiseconds
    GARP LeaveAllTime            : 1000 centiseconds
    GARP HoldTime                : 40 centiseconds

**Table 1** Description of the **display garp timer** command output
Item	Description
GARP JoinTime	Join timer value, which can be configured using the garp timer command.
GARP LeaveTime	Leave timer value, which can be configured using the garp timer command.
GARP LeaveAllTime	LeaveAll timer value, which can be configured using the garp timer leaveall command.
GARP HoldTime	Hold timer value, which can be configured using the garp timer command.