display explicit-path

Function

The display explicit-path command displays information about an explicit path and tunnels using it.

Format

display explicit-path [ path-name ]

display explicit-path name path-name

Parameters

Parameter	Description	Value
name path-name	Specifies the name of an explicit path.	The value is a string of 1 to 128 case-insensitive characters, spaces not supported.

Parameter

Description

Value

name path-name

Specifies the name of an explicit path.

The value is a string of 1 to 128 case-insensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-te	read

Usage Guidelines

Usage Scenario

Information about an explicit path and tunnels using it needs to be obtained.

Implementation Procedure

If the explicit path is used by more than 20 tunnels, the system will segment the output information explicitly, and the 20 interfaces are one segment.

Precautions

If no path name is specified, information about all explicit paths is displayed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about a label hop named main.

<HUAWEI> display explicit-path main
Path Name :    main     Path Status :  Enabled
 1           284689          Adjiacency     Sid-Label
 2           284693          Adjiacency     Sid-Label

**Table 1** Description of the **display explicit-path** command output
Item	Description
Path Name	Explicit path name.
Path Status	Explicit path status: Enabled. Disabled.