display mpls ldp lsp traffic-statistics

Function

The display mpls ldp lsp traffic-statistics command displays LDP traffic statistics.

Format

display mpls ldp lsp traffic-statistics [ ipv4-address mask-length ] [ verbose ]

Parameters

Parameter	Description	Value
ipv4-address	Displays LDP traffic statistics with the specified route prefix.	The value is in dotted decimal notation.
mask-length	Displays LDP traffic statistics with a specified route prefix mask length.	The value is fixed at 32.
verbose	Displays detailed statistics.	-

Parameter

Description

Value

ipv4-address

Displays LDP traffic statistics with the specified route prefix.

The value is in dotted decimal notation.

mask-length

Displays LDP traffic statistics with a specified route prefix mask length.

The value is fixed at 32.

verbose

Displays detailed statistics.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-ldp	read

Usage Guidelines

Usage Scenario

After MPLS and MPLS statistics collection are enabled, to view LDP traffic statistics, run the display mpls ldp lsp traffic-statistics command.

Note: If MPLS traffic statistics collection is enable, the traffic statistics of an LDP LSP start to be collected only after the LDP LSP is created, and will be reset and recollected if the LDP LSP deleted and reestablished. To check the status of an LDP LSP, run the ***display mpls lsp ** * command. To check the last down time of an LDP LSP, run the *display mpls last-info lsp-down * command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display LDP traffic statistics.

<HUAWEI> display mpls ldp lsp traffic-statistics
-------------------------------------------------------------------------------
LDP LSP Traffic Statistics Information
-------------------------------------------------------------------------------
FEC                In/Out Label  Out Interface    Out Packets/Bytes
10.2.2.2/32        3338/3        GE0/1/2          101268/708876

# Display detailed statistics.

<HUAWEI> display mpls ldp lsp traffic-statistics verbose
----------------------------------------------------------------------------------
LDP LSP Traffic Statistics Information
----------------------------------------------------------------------------------
FEC      : 10.112.233.233/32   Current Time  : 2015-07-21 09:10:21
LSR Type : Ingress             Nexthop       : 10.123.123.123
Out Label: 2025                Out Interface : GE0/1/0
Last 300 seconds output rate 24000 bits/sec, 1050 packets/sec
Realtime 30 seconds output rate 2400 bits/sec, 105 packets/sec
Output: 3000 bytes, 1050 packets

**Table 1** Description of the **display mpls ldp lsp traffic-statistics** command output
Item	Description
FEC	Forwarding equivalence class.
In/Out Label	Values of the incoming and outgoing labels.
Out Label	Outgoing label value.
Out Interface	Outbound interface name.
Out Packets/Bytes	Number of forwarded packets and bytes.
Current Time	Current time.
LSR Type	LSA type: Ingress. Transit.
Nexthop	Next-hop IP address.
Output	Total number of output packets.