display mpls ldp remote-peer

Function

The display mpls ldp remote-peer command displays information about a remote LDP peer.

Format

display mpls ldp remote-peer [ remote-peer-name | peer-id peer-id ]

Parameters

Parameter	Description	Value
remote-peer-name	Specifies the name of a remote LDP peer. The name is defined using the mpls ldp remote-peer command.	The name is a string of 1 to 32 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.
peer-id peer-id	Displays information about the LDP remote peer of a specified peer ID.	The value is in dotted decimal notation.

Parameter

Description

Value

remote-peer-name

Specifies the name of a remote LDP peer. The name is defined using the mpls ldp remote-peer command.

The name is a string of 1 to 32 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

peer-id peer-id

Displays information about the LDP remote peer of a specified peer ID.

The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mpls-ldp	read

Usage Guidelines

Usage Scenario

Remote LDP peers are used to set up remote LDP sessions to transmit VPN services.

To view information about configured remote LDP peers, run the display mpls ldp remote-peer command.

Prerequisites

A remote LDP peer has been configured.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about remote LDP peers.

<HUAWEI> display mpls ldp remote-peer

                         LDP Remote Entity Information
 ------------------------------------------------------------------------------
 Remote Peer Name  : 10.1.1.1
 Description       : ----
 Remote Peer IP    : 10.1.1.1            LDP ID        : 10.1.1.2:0
 Transport Address : 10.1.1.2            Entity Status : Active

 Configured Keepalive Hold Timer : 45 Sec
 Configured Keepalive Send Timer : ----
 Configured Hello Hold Timer     : 45 Sec
 Negotiated Hello Hold Timer     : 45 Sec
 Configured Hello Send Timer     : ----
 Configured Delay Timer          : 10 Sec
 Hello Packet sent/received      : 162/159
 Label Advertisement Mode        : Downstream Unsolicited
 Auto-config                     : Auto Accept
 Manual-config                   : effective
 Session-Protect effect          : NO
 Session-Protect Duration        : ----
 Session-Protect Remain          : ----
 ------------------------------------------------------------------------------
 TOTAL: 1 Remote-Peer(s) Found.

**Table 1** Description of the **display mpls ldp remote-peer** command output
Item	Description
LDP ID	Local LDP ID.
Remote Peer Name	Name of a remote LDP peer.
Remote Peer IP	IP address of a remote LDP peer.
Entity Status	Status of a remote LDP peer: Active. Inactive.
Description	Remote peer description.
Transport Address	Transport address, which is used to establish an LDP session with the remote LDP peer.
Configured Keepalive Hold Timer	Value of the configured Keepalive hold timer.
Configured Keepalive Send Timer	Value of the configured Keepalive send timer.
Configured Hello Hold Timer	Value of the configured Hello hold timer.
Configured Hello Send Timer	Value of the configured Hello send timer.
Configured Delay Timer	Value of the configured delay timer.
Hello Packet sent/received	Number of sent and received Hello packets.
Negotiated Hello Hold Timer	Value of the effective Hello hold timer.
Label Advertisement Mode	Label advertisement mode: Downstream Unsolicited. Downstream On Demand.
Auto-config	Describes how the LDP remote session is enabled: ----: The remote LDP peer is manually configured. L2VPN: After an L2VPN is configured, the remote LDP peer is automatically configured. Session-Protect: The remote LDP peer is triggered by LDP session protection. RLFA: The remote LDP session is triggered by Remote LFA. Auto Accept: The remote LDP session is automatically established after a local device receives Targeted Hello messages.
Manual-config	Whether manual configuration is effective: effective: Indicates that manual configuration is effective. ineffective: Indicates that manual configuration is ineffective. ----: Indicates that a remote LDP session is automatically created.
Session-Protect effect	Whether LDP session protection takes effect: YES. NO.
Session-Protect Duration	Duration when LDP session protection remains effective.
Session-Protect Remain	Remaining time when LDP session protection remains effective.
TOTAL	Total number of remote peers.