The actual command output varies according to the device. The command output here is only an example.
# Display information about RSVP-TE resource reservations for all interfaces.
<HUAWEI> display mpls rsvp-te reservation
Interface GigabitEthernet0/1/0
Tunnel Addr: 10.1.3.2 Ingress LSR ID: 1.1.1.1
Local LSP ID: 0 Session Tunnel ID: 200
Upstream Label: 13312
Token bucket rate: 0.00 Token bucket size: 1000.00
Interface: Outgoing-Interface at the Egress
Tunnel Addr: 10.1.4.2 Ingress LSR ID: 2.2.2.2
Local LSP ID: 1 Session Tunnel ID: 300
Upstream Label: 3
Token bucket rate: 0.00 Token bucket size: 1000.00
Table 1 Description of the display mpls rsvp-te reservation command output
Item |
Description |
Interface GigabitEthernet0/1/0 |
Name of an RSVP-TE-enabled Ethernet interface.
|
Interface |
Interface.
|
Tunnel Addr |
Tunnel address formatted as X.X.X.X.
|
Ingress LSR ID |
Ingress LSR ID formatted as X.X.X.X.
|
Local LSP ID |
Local LSP ID.
|
Session Tunnel ID |
Tunnel ID.
|
Upstream Label |
Incoming label value.
|
Token bucket rate |
Token bucket rate, in Byte/s.
|
Token bucket size |
Token bucket size, in Bytes.
|
Outgoing-Interface at the Egress |
Name of an interface at the egress of a CR-LSP.
|