display saved-configuration time

Function

The display saved-configuration time command displays time information about the configuration of the autosave function.

display saved-configuration time

None

All views

3: Management level

Task Name	Operations
config	read

To check the time information about the configuration of the autosave function, run the display saved-configuration time command.

The actual command output varies according to the device. The command output here is only an example.

# Display the time information about the configuration of the autosave function on the device.

<HUAWEI> display saved-configuration time
Saved configuration automatically:
15:49:07 DefaultZoneName 2015/06/08
Time Zone: UTC+00:00

**Table 1** Description of the **display saved-configuration time** command output
Item	Description
Saved configuration automatically	The time information about the configuration of the autosave function.
Time Zone	Time zone.