ipv4-family (MPLS-LDP-VPN instance view)

Function

The ipv4-family command displays the MPLS LDP VPN IPv4 view.

By default, the MPLS LDP IPv4 view is not displayed.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

ipv4-family

Parameters

None

Views

MPLS-LDP-VPN instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

The ipv4-family command displays the MPLS LDP IPv4 view.

Prerequisites

The following operations have been performed:

Run the mpls command in the system view to enable MPLS globally.
Run the mpls ldp command in the system view to enable MPLS LDP globally.

Example

# Enter the MPLS LDP VPN IPv4 view.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpn1
[*HUAWEI-vpn-instance-vpn1] route-distinguisher 20:2
[*HUAWEI-vpn-instance-vpn1] quit
[*HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls ldp vpn-instance vpn1
[*HUAWEI-mpls-ldp-vpn-instance-vpn1] ipv4-family