clear

Function

The clear command clears the port blocking mode of an ERPS ring.

clear

None

ERPS ring view

2: Configuration level

Task Name	Operations
erps	execute

Usage Scenario

To clear the FS or MS mode configured by the erps ring protect-switch command or port protect-switch command, run the clear command.

The clear command also provides the following functions:

Triggers revertive switching before the wait to restore (WTR) or wait to block (WTB) timer expires in the case of revertive operations.
Triggers revertive switching in the case of non-revertive operations.

# Clear the port blocking mode of ERPS ring 5.

<HUAWEI> system-view
[~HUAWEI] erps ring 5
[*HUAWEI-erps-ring5] clear