evpl instance (PW-VE interface view)

Function

The evpl instance command binds a PW-VE interface to an EVPL instance.

The undo evpl instance command unbinds a PW-VE interface from an EVPL instance.

By default, a PW-VE interface is not bound to any EVPL instance.

Format

evpl instance instance-value peer ip-address

undo evpl instance instance-value peer ip-address

Parameters

Parameter	Description	Value
instance-value	Specifies an EVPL instance ID.	For details about the value range, see the evpl instance (System view) command.
peer ip-address	Specifies a peer VTEP IP address for an EVPL instance.	The value is in dotted decimal notation.

Parameter

Description

Value

instance-value

Specifies an EVPL instance ID.

For details about the value range, see the evpl instance (System view) command.

peer ip-address

Specifies a peer VTEP IP address for an EVPL instance.

The value is in dotted decimal notation.

Views

PW-VE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
evpl	write

Usage Guidelines

In scenarios where VXLAN tunnels are used for user access, to allow a device to terminate VXLAN tunnel information on its PW-VE interface, run the evpl instance command to bind the PW-VE interface to the EVPL instance of the VXLAN tunnel.

Example

# Bind a PW-VE interface to an EVPL instance.

<HUAWEI> system-view
[~HUAWEI] evpl instance 1 vxlan-mode
[*HUAWEI-evpl-vxlan1] local-vni 10
[*HUAWEI-evpl-vxlan1] vtep-src 1.1.1.2
[*HUAWEI-evpl-vxlan1] quit
[*HUAWEI] interface pw-ve 1
[*HUAWEI-PW-VE1] evpl instance 1 peer 2.2.2.2