dynamic-flow age interval-multiplier

Function

The dynamic-flow age interval-multiplier command sets a multiplier of the measurement period to determine the flow aging time.

The undo dynamic-flow age interval-multiplier command restores the default aging time.

By default, the aging time is 10 times as long as the measurement period but cannot be shorter than 10 minutes.

Format

dynamic-flow age interval-multiplier multi-value

undo dynamic-flow age interval-multiplier [ multi-value ]

Parameters

Parameter	Description	Value
multi-value	Sets a multiplier of the measurement period to determine the flow aging time.	The value is an integer ranging from 2 to 100.

Parameter

Description

Value

multi-value

Sets a multiplier of the measurement period to determine the flow aging time.

The value is an integer ranging from 2 to 100.

Views

IFIT view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ifit	write

Usage Guidelines

Usage Scenario

To set a multiplier of the measurement period to determine the flow aging time, run the dynamic-flow age interval-multiplier command. This facilitates maintenance.

Example

# Set the aging time of iFIT dynamic flows to be 20 times as long as the measurement period.

<HUAWEI> system-view
[~HUAWEI] ifit
[*HUAWEI-ifit] dynamic-flow age interval-multiplier 20