mpls rsvp-te keep-multiplier

Function

The mpls rsvp-te keep-multiplier command sets the multiplier of a timeout period for a Path State Block (PSB) and a Reserved State Block (RSB).

The undo mpls rsvp-te keep-multiplier command restores the default timeout multiplier.

By default, the timeout multiplier is 3.

mpls rsvp-te keep-multiplier number

undo mpls rsvp-te keep-multiplier

Parameter	Description	Value
number	Set PSB and RSB timeout multiplier.	The value is an integer ranging from 3 to 255.

Parameter

Description

Value

number

Set PSB and RSB timeout multiplier.

The value is an integer ranging from 3 to 255.

MPLS view

2: Configuration level

Task Name	Operations
mpls-te	write

Usage Scenario

Expired_Time = (Keep-multiplier + 0.5) x 1.5 x Refresh-time

Keep-multiplier is the number of dropped Refresh messages and Refresh-time is the interval at which Refresh messages are sent.

Prerequisites

RSVP-TE has been enabled using the mpls rsvp-te command in the MPLS view.

# Set the multiplier to 5.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls rsvp-te
[*HUAWEI-mpls] mpls rsvp-te keep-multiplier 5