The nqa ipfpm mcp command enables MCP globally and displays the IPFPM-MCP view.
The undo nqa ipfpm mcp command disables MCP globally.
By default, MCP is enabled globally.
Usage Scenario
To enable MCP globally so that IP FPM performance statistics can be implemented, run the nqa ipfpm mcp command. An MCP collects statistics reported by DCPs, summarizes and calculates the statistics, and reports measurement results to user terminals or the NMS.
Follow-up Procedure
Run the mcp id command to configure an MCP ID.
Precautions
MCP and DCP functionalities can be configured on the same device.