dcp

Function

The dcp command configures a DCP ID for an IP FPM instance on a measurement control point (MCP).

The undo dcp command deletes a DCP ID from an IP FPM instance on an MCP.

By default, no DCP ID is specified for an IP FPM instance on an MCP.

Format

dcp dcp-id

undo dcp [ dcp-id ]

Parameters

Parameter	Description	Value
dcp-id	Specifies the ID of a DCP in the IP FPM model. Using the Router ID of a device that is configured as a DCP as its DCP ID is recommended.	This value is in dotted decimal notation.

Parameter

Description

Value

dcp-id

Specifies the ID of a DCP in the IP FPM model.

Using the Router ID of a device that is configured as a DCP as its DCP ID is recommended.

This value is in dotted decimal notation.

Views

IPFPM-MCP instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipfpm	write

Usage Guidelines

Usage Scenario

An IP FPM instance contains one or more DCPs. To specify DCP IDs for an IP FPM instance after it is created on an MCP, run the dcp command so that the MCP can determine whether the statistics are reported from authenticated DCPs.

Prerequisites

The instance command has been run to configure an IP FPM instance on an MCP.

Configuration Impact

If dcp-id is not specified, the undo dcp command deletes all DCP IDs from a specified IP FPM instance on an MCP.

Precautions

The DCP ID specified for an IP FPM instance on an MCP must be the same as that configured in the dcp id command on a DCP.

Example

# Configure a DCP ID.

<HUAWEI> system-view
[~HUAWEI] nqa ipfpm mcp
[*HUAWEI-nqa-ipfpm-mcp] instance 1
[*HUAWEI-nqa-ipfpm-mcp-instance-1] dcp 10.1.1.1