inter-area-segmented enable

Function

The inter-area-segmented enable command enables the support for inter-area tunnel segment on VPN ingress nodes.

The undo inter-area-segmented enable command disables the support for inter-area tunnel segment.

By default, the VPN does not support inter-area tunnel segment function.

Format

inter-area-segmented enable

undo inter-area-segmented enable

Parameters

None

Views

VPN instance IPv4 address family MVPN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mvpn	write

Usage Guidelines

Usage Scenario

Run the inter-area-segmented enable command on the ingress node of VPN tunnel, the NG MVPN supports tunnel segment in inter-area scenario.

Prerequisites

The multicast function is enabled on the VPN.

Example

# Configure the VPN instance mcast1 to enables the support for inter-area tunnel segment function on ingress node.

<HUAWEI> system-view
[~HUAWEI] multicast mvpn 2.2.2.2
[*HUAWEI] ip vpn-instance mcast1
[*HUAWEI-vpn-instance-mcast1] ipv4-family
[*HUAWEI-vpn-instance-mcast1-af-ipv4] route-distinguisher 100:100
[*HUAWEI-vpn-instance-mcast1-af-ipv4] multicast routing-enable
[*HUAWEI-vpn-instance-mcast1-af-ipv4] mvpn
[*HUAWEI-vpn-instance-mcast1-af-ipv4-mvpn] inter-area-segmented enable