vrf-route-import compatible draft

Function

The vrf-route-import compatible draft command configures the VPN Routing and Forwarding (VRF) Route Import Extended Community carried in BGP Update messages to use the format defined in an IETF draft.

The undo vrf-route-import compatible draft command restores the default configuration.

By default, the VRF Route Import Extended Community carried in BGP Update messages uses the standard packet encapsulation format defined in a relevant standard.

Format

vrf-route-import compatible draft

undo vrf-route-import compatible draft

Parameters

None

Views

VPN instance IPv4 address family MVPN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mvpn	write

Usage Guidelines

Usage Scenario

If a non-Huawei device uses the packet encapsulation format defined in an IETF draft, run the vrf-route-import compatible draft command to enable a Huawei device to use the packet encapsulation format defined in the draft so that the Huawei and non-Huawei devices can communicate.

Precautions

When running the vrf-route-import compatible draft command, ensure that the local and remote devices use the same packet encapsulation format. Otherwise, the devices cannot communicate.

Example

# Configure the VRF Route Import Extended Community carried in BGP Update messages to use the format defined in an IETF draft.

<HUAWEI> system-view
[~HUAWEI] multicast mvpn 2.2.2.2
[*HUAWEI] ip vpn-instance mcast1
[*HUAWEI-vpn-instance-mcast1] ipv4-family
[*HUAWEI-vpn-instance-mcast1-af-ipv4] route-distinguisher 100:100
[*HUAWEI-vpn-instance-mcast1-af-ipv4] multicast routing-enable
[*HUAWEI-vpn-instance-mcast1-af-ipv4] mvpn
[*HUAWEI-vpn-instance-mcast1-af-ipv4-mvpn] vrf-route-import compatible draft