lsp-version

Function

The lsp-version command can configure the protocol that is used by the LSP test instance.

The undo lsp-version command can restore the default setting.

By default, RFC 4379 is adopted.

lsp-version { ptn-mode | rfc4379 }

undo lsp-version

undo lsp-version { ptn-mode | rfc4379 }

Parameter	Description	Value
ptn-mode	Indicates that the PTN mode is used for the LSP.	The PTN mode is recommended when the device is required to communicate with the PTN 3900.
rfc4379	Indicates that the protocol defined in RFC 4379 is adopted.	-

Parameter

Description

Value

ptn-mode

Indicates that the PTN mode is used for the LSP.

The PTN mode is recommended when the device is required to communicate with the PTN 3900.

rfc4379

Indicates that the protocol defined in RFC 4379 is adopted.

NQA view

2: Configuration level

Task Name	Operations
sla	write

Usage Scenario

The lsp-version command can be used to specify the protocol that is used by the LSP test instance.

Prerequisites

Before setting lsp-version, you must set test-type to pwe3trace.

NOTE:

The protocol adopted by a running LSP test instance cannot be changed.

# Configure the LSP test instance to use the protocol defined in RFC 4379.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[~HUAWEI-nqa-user-test] test-type pwe3trace
[~HUAWEI-nqa-user-test] lsp-version rfc4379