vc-type ldp (PWE3 Trace test instance)

Function

The vc-type ldp command specifies a VC protocol for NQA PWE3 trace test.

The undo vc-type ldp command restores the default VC protocol.

The default VC protocol type is LDP.

vc-type ldp

undo vc-type

None

NQA view

2: Configuration level

Task Name	Operations
sla	write

Usage Scenario

To configure a VC protocol, run the vc-type ldp command. This protocol is the same as the PW protocol.

# Set the VC protocol type to LDP in the NQA view.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance admin pwe3
[*HUAWEI-nqa-admin-pwe3] test-type pwe3trace
[*HUAWEI-nqa-admin-pwe3] vc-type ldp