test-failtimes (PWE3 Ping test instance)

Format

test-failtimes failTimes

undo test-failtimes

Parameters

Parameter	Description	Value
failTimes	Specifies the number of consecutive failures of an NQA test.	The value is an integer ranging from 1 to 15.

Parameter

Description

Value

failTimes

Specifies the number of consecutive failures of an NQA test.

The value is an integer ranging from 1 to 15.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

A probe is a process in which a probe packet is sent in a test.

Multiple packets can be sent in a test. That is, a test can contain several probes. By default, a test is considered as a success if one or more probes in the test succeed; a test is considered failed if all probes in the test fail.

After the test-failtimes command is executed for an NQA test instance, traps will be sent only when send-trap is enabled.

Precautions

If parameters need to be changed during the running of the test instance, the system prompts you whether to terminate the test instance. Press "Y" or "N" as required.

If you press "Y", the test instance is terminated and parameters changed. The settings take effect after being committed. To restart the test instance, run the start command.
If you press "N", the test instance keeps running, and the parameters fail to be modified.

Example

# Set times for an NQA test instance to 10.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type pwe3ping
[*HUAWEI-nqa-user-test] test-failtimes 10