The reset mpls rsvp-te p2mp sub-lsp command is used to restart the sub-LSP of a specified P2MP TE tunnel.
| Parameter | Description | Value |
|---|---|---|
| tunnel-id |
Specifies a tunnel ID. |
The value is an integer in the range of 0 to 65535. |
| lsp-id |
Specifies a tunnel ID. |
The value is an integer that ranges from 0 to 65535. |
| ingress-lsr-id |
Specifies the LSR ID of the ingress node. |
The value is an integer in the range of 0 to 4294967295. |
| sub-group-id |
Specifies a group ID. |
The value is an integer that ranges from 0 to 65535. |
| sub-group-origin-id |
Specifies an original group ID. |
The value is an integer that ranges from 0 to 4294967295. |
| s2l-destination |
Specifies an S2L address. |
The value is an integer that ranges from 0 to 4294967295. |
Usage Scenario
If an error occurs in the tunnel service and no other configuration method can be used to restore the service, run the reset mpls rsvp-te p2mp sub-lsp command in the user view to reestablish the sub-LSP of the tunnel to quickly restore the service.
Configuration Impact
After this command is run, the specified sub-LSP is deleted and then re-established.