reset segment-routing traffic-statistics

Function

The reset segment-routing traffic-statistics command clears traffic statistics about a specified SR LSP (SR-MPLS BE).

reset segment-routing traffic-statistics [ ip-address mask-length ]

reset segment-routing traffic-statistics [ ip-address mask-length ] flex-algo [ flexAlgoId ]

Parameter	Description	Value
ip-address	Specifies an interface IP address.	The value is in dotted decimal notation.
mask-length	Specifies a mask length.	The value is 32.
flex-algo flexAlgoId	Specifies a Flex-Algo ID.	The value is an integer ranging from 128 to 255.

Parameter

Description

Value

ip-address

Specifies an interface IP address.

The value is in dotted decimal notation.

mask-length

Specifies a mask length.

The value is 32.

flex-algo flexAlgoId

Specifies a Flex-Algo ID.

The value is an integer ranging from 128 to 255.

User view

3: Management level

Task Name	Operations
segr	debug

Usage Scenario

To clear traffic statistics before re-collection, run the reset segment-routing traffic-statistics command.

To check SR LSP traffic statistics, run the display segment-routing traffic-statistics command.

# Clear SR LSP traffic statistics.

<HUAWEI> reset segment-routing traffic-statistics

# Clear Flex-Algo LSP traffic statistics.

<HUAWEI> reset segment-routing traffic-statistics flex-algo