reset lacp statistics eth-trunk

Function

The reset lacp statistics eth-trunk command clears statistics about LACPDUs on all Eth-Trunk interfaces in static LACP mode, on a specified Eth-Trunk interface in static LACP mode, or on a specified member interface.

Format

reset lacp statistics eth-trunk [ trunk-id [ interface { interface-type interface-number | interface-name } ] ]

Parameters

Parameter	Description	Value
interface interface-type interface-number interface-name	Specifies a type,number or name of an interface.	-
eth-trunk trunk-id	Specifies the ID of an Eth-Trunk interface.	The value is an integer ranging from 0 to 65535.

Parameter

Description

Value

interface interface-type interface-number interface-name

Specifies a type,number or name of an interface.

eth-trunk trunk-id

Specifies the ID of an Eth-Trunk interface.

The value is an integer ranging from 0 to 65535.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
trunk	execute

Usage Guidelines

Usage Scenario

Before collecting statistics about LACPDUs on a specific interface within a period, you need to run the reset lacp statistics eth-trunk command to clear the existing statistics about LACPDUs on the interface.

When using the reset lacp statistics eth-trunk command, note that:

1.If no optional parameter is specified, statistics about LACPDUs on all Eth-Trunk interfaces in static LACP mode are cleared.

2.If trunk-id is specified only, statistics about LACPDUs on a specified Eth-Trunk interface in static LACP mode are cleared.

3.If both trunk-id and interface portType portNum are specified, statistics about LACPDUs on the specified member interface of the specified Eth-Trunk interface in static LACP mode are cleared.

Prerequisites

Before clearing the statistics about LACPDUs on a specified Eth-Trunk interface, ensure that the Eth-Trunk interface exists and works in static LACP mode.
Before clearing the statistics about LACPDUs on a specified member interface of an Eth-Trunk interface, ensure that the Eth-Trunk interface and its member interface exist and the Eth-Trunk interface works in static LACP mode.

Configuration Impact

The reset lacp statistics eth-trunk command clears the statistics about sent and received LACPDUs on all Eth-Trunk interfaces in static LACP mode, on a specified Eth-Trunk interface in static LACP mode, or on a specified member interface are cleared and cannot be restored. Therefore, exercise caution when you run the command.

Example

# Clear statistics about LACPDUs on the member interface GE 0/1/1 of Eth-Trunk 1 in static LACP mode.

<HUAWEI> reset lacp statistics eth-trunk 1 interface GigabitEthernet 0/1/1

# Clear statistics about LACPDUs on all Eth-Trunk interfaces in static LACP mode.

<HUAWEI> reset lacp statistics eth-trunk