snmp-agent protocol source-status all-interface

Function

The snmp-agent protocol ipv6 source-ip command specifies an IPv6 source address for SNMP to receive and respond to requests from an NMS.

The undo snmp-agent protocol ipv6 source-ip command restores the default configuration.

The snmp-agent protocol source-status ipv6 all-interface command allows all IPv6 addresses on the device to be used by SNMP to receive and respond to requests from an NMS.

The undo snmp-agent protocol source-status ipv6 all-interface command restores the default configuration.

The snmp-agent protocol source-interface command specifies a source interface for SNMP to receive and respond to requests from an NMS.

The undo snmp-agent protocol source-interface command restores the default configuration.

The snmp-agent protocol source-status all-interface command allows all interfaces on the device to be used by SNMP to receive and respond to requests from an NMS.

The undo snmp-agent protocol source-status all-interface command restores the default configuration.

The snmp-agent proxy protocol source-interface command specifies a source interface for the SNMP proxy to receive and respond to requests from the CCU.

The undo snmp-agent proxy protocol source-interface command restores the default configuration.

The snmp-agent proxy protocol source-status all-interface allows all interfaces on the device to be used by the SNMP proxy to receive and respond to requests from the CCU.

The undo snmp-agent proxy protocol source-status all-interface command restores the default configuration.

The snmp-agent proxy protocol ipv6 source-ip command specifies an IPv6 source address for the SNMP proxy to receive and respond to requests from the CCU.

The undo snmp-agent proxy protocol ipv6 source-ip command restores the default configuration.

The snmp-agent proxy protocol source-status ipv6 all-interface allows all IPv6 source addresses on the device to be used by the SNMP proxy to receive and respond to requests from the CCU.

The undo snmp-agent proxy protocol source-status ipv6 all-interface restores the default configuration.

By default, no IPv6 source address is specified for SNMP to receive and respond to requests from an NMS. The function that allows all IPv6 addresses on the device to be used by SNMP to receive and respond to requests from an NMS is not enabled. No source interface is specified for SNMP to receive and respond to requests from an NMS. The function that allows all interfaces on the device to be used by SNMP to receive and respond to requests from an NMS is not enabled. No source interface/IPv6 source address is specified for the SNMP proxy to receive and respond to requests from the CCU. The function that allows all interfaces or IPv6 addresses on the device to be used by the SNMP proxy to receive and respond to requests from the CCU is not enabled.

Format

snmp-agent protocol source-status [ ipv6 ] all-interface

snmp-agent proxy protocol source-status [ ipv6 ] all-interface

undo snmp-agent protocol source-status [ ipv6 ] all-interface

undo snmp-agent proxy protocol source-status [ ipv6 ] all-interface

Parameters

None

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
snmp	write

Usage Guidelines

Usage Scenario

To allow all IPv6 addresses on the device to be used by SNMP to receive and respond to requests from an NMS, run the snmp-agent protocol source-status ipv6 all-interface command.

To allow all interfaces on the device to be used by SNMP to receive and respond to requests from an NMS, run the snmp-agent protocol source-status all-interface command.

To allow data to be managed in a unified manner, you can specify the source interface/IPv6 source address for the SNMP proxy to receive and respond to requests from the CCU or configure the function that allows all interfaces/IPv6 addresses on the device to be used by the SNMP proxy to receive and respond to requests from the CCU.

Precautions

After the snmp-agent protocol source-status ipv6 all-interface command is run, all IPv6 addresses on the device can be used by SNMP to receive and respond to requests from an NMS, which brings security risks. Therefore, a risk message will be displayed when you run the snmp-agent protocol source-status ipv6 all-interface command.

After the snmp-agent protocol source-status all-interface command is run, all interfaces on the device can be used by SNMP to receive and respond to requests from an NMS, which brings security risks. Therefore, a risk message will be displayed when you run the snmp-agent protocol source-status all-interface command.

A risk message will be displayed when you run the snmp-agent proxy protocol source-status all-interface command.

A risk message will be displayed when you run the snmp-agent proxy protocol source-status ipv6 all-interface command.

Example

# Enable the function that allows all IPv6 addresses on the device to be used by SNMP to receive and respond to requests from an NMS.

<HUAWEI> system-view
[~HUAWEI] snmp-agent protocol source-status all-interface
Warning: It will allowed all accessible network to access the device.