whitelist session-car self-ping

Function

The whitelist session-car self-ping command sets Session-CAR parameters for the self-ping whitelist.

The undo whitelist session-car self-ping command restores the default Session-CAR values for the self-ping whitelist.

By default, the CIR, CBS, PIR, and PBS of the Session-CAR function for the self-ping whitelist are 256 kbit/s, 50000 bytes, 600 kbit/s, and 76800 bytes, respectively.

Format

whitelist session-car self-ping { cir cir-value | cbs cbs-value | pir pir-value | pbs pbs-value } *

undo whitelist session-car self-ping [ { cir cir-value | cbs cbs-value | pir pir-value | pbs pbs-value } * ]

Parameters

Parameter Description Value
cir cir-value

Specifies a committed information rate (CIR), that is, the average rate at which packets can be transmitted or forwarded.

The value is an integer ranging from 1 to 1000000, in kbit/s. The default value is 256.

cbs cbs-value

Specifies a committed burst size (CBS), that is, the committed volume of burst traffic that can pass instantly.

The value is an integer ranging from 1 to 9000000, in bytes. The default value is 50000.

pir pir-value

Specifies a peak information rate (PIR), that is, the peak rate at which packets can be transmitted or forwarded.

The value is an integer ranging from 1 to 1000000, in kbit/s. The default value is 600.

pbs pbs-value

Specifies a peak burst size (PBS), that is, the peak volume of burst traffic that can pass instantly.

The value is an integer ranging from 1 to 9000000, in bytes. The default value is 76800.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
mpls-te write

Usage Guidelines

Usage Scenario

If a device receives a large number of self-ping messages, you can run the whitelist session-car self-ping command to modify the bandwidth values as needed for the message channels between self-ping sessions. This configuration ensures that self-ping messages can be properly sent.

Precautions

pir-value must be greater than or equal to cir-value. If you attempt to set a pir-value value smaller than cir-value, the following error message will be displayed: "Error: The pir %d must be greater than or equal to the cir %d."

pbs-value must be greater than or equal to cbs-value. If you attempt to set a pbs-value value smaller than cbs-value, the following error message will be displayed: "Error: The pbs %d must be greater than or equal to the cbs %d."

Example

# Sets Session-CAR values for the self-ping whitelist.
<HUAWEI> system-view
[~HUAWEI] whitelist session-car self-ping cir 2 cbs 1600 pir 4000 pbs 5000
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >