The send-time command makes a key act as a send key for the specified interval of time.
The undo send-time command deletes the send-time configuration.
By default, no send-time is configured.
Parameter | Description | Value |
---|---|---|
start-date |
Specifies the start date of the month to be configured as the send date for the given key. <startDate>&<1-31> specifies the dates of the month. A maximum of 31 can be configured. |
The value ranges from 1 to 31. |
to |
Acts as a separator. |
- |
end-date |
Specifies the end send date of the month. |
The value ranges from 2 to 31. The end date should be greater than the start date. |
date |
Specifies the dates of the month. |
- |
Usage Scenario
Each keychain consists of multiple key IDs that are valid within different time periods and each key ID is configured with an authentication algorithm. When a key ID becomes valid, the corresponding authentication algorithm is used, ensuring the dynamic change of authentication algorithms. Configure different key IDs for packet sending and receiving to be valid within different time periods.
Implementation Procedure
There are two keychain validity modes:
Precautions
Only one key ID is valid within a time period. In other words, the send time periods of different key-ids cannot overlap with each other.