lacp lag-mib admin-key change-to-lagid (System view)

Function

The lacp lag-mib admin-key change-to-lagid command sets the values of the dot3adAggActorAdminKey and dot3adAggPortActorAdminKey objects in the LAG-MIB each to be the same as an Eth-Trunk ID.

The undo lacp lag-mib admin-key change-to-lagid command restores the default configuration.

By default, the values of the dot3adAggActorAdminKey and dot3adAggPortActorAdminKey objects in the LAG-MIB are each the same as an Eth-Trunk ID plus 1.

Format

lacp lag-mib admin-key change-to-lagid

undo lacp lag-mib admin-key change-to-lagid

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
trunk	write

Usage Guidelines

Usage Scenario

By default, the values of the dot3adAggActorAdminKey object in dot3adAggTable and the 3adAggPortActorAdminKey object in dot3adAggPortTable in the LAG-MIB are each the same as an Eth-Trunk ID plus 1. When an Eth-Trunk ID is 65535, the values of the two objects are each 65536, exceeding the permitted value range. To resolve this issue, run the lacp lag-mib admin-key change-to-lagid command to set the values of the two objects each to be the same as an Eth-Trunk ID.

Example

# Set the values of the dot3adAggActorAdminKey and dot3adAggPortActorAdminKey objects in the LAG-MIB each to be the same as an Eth-Trunk ID.

<HUAWEI> system-view
[~HUAWEI] lacp lag-mib admin-key change-to-lagid