The set cpu-reliability command specifies the level-1 alarm threshold, level-1 clear alarm threshold, level-2 alarm threshold, level-2 clear alarm threshold, and detection period of CPU overload.
The undo set cpu-reliability command restores the default configuration.
By default, the level-1 alarm threshold, level-1 clear alarm threshold, level-2 alarm threshold, level-2 clear alarm threshold, and detection period of CPU overload are 60, 50, 80, 70, and 60, respectively.
| Parameter | Description | Value |
|---|---|---|
| first-alarm first-alarm-value |
Specifies a level-1 alarm threshold. |
The value is an integer ranging from 2 to 97. The default value is 60. |
| second-recover second-recover-value |
Specifies a level-2 clear alarm threshold. |
The value is an integer ranging from 3 to 98. The default value is 70. |
| second-alarm second-alarm-value |
Specifies a level-2 alarm threshold. |
The value is an integer ranging from 4 to 99. The default value is 80. |
| period period-value |
Specifies a detection period. |
The value is an integer ranging from 30 to 3600, in seconds. The default value is 60. |
| slot slot-id |
Specifies the level-1 and level-2 alarm thresholds of CPU overload on the slave control board. |
- |
| first-recover first-recover-value |
Specifies a level-1 clear alarm threshold. |
The value is an integer ranging from 1 to 96. The default value is 50. |
Usage Scenario
To configure the level-1 alarm threshold, level-1 clear alarm threshold, level-2 alarm threshold, level-2 clear alarm threshold, and detection period of CPU overload, run the set cpu-reliability command based on deployed services.
Precautions
This command is supported only on the admin VS.
<HUAWEI> system-view [~HUAWEI] set cpu-reliability first-recover 10 first-alarm 30 second-recover 50 second-alarm 60 period 1000 slot 1