slave switchover(System view)

Function

The slave switchover enable command enables the forcible master/slave control board switchover function.

The slave switchover disable command disables the forcible master/slave control board switchover function.

The undo slave switchover disable command enables the forcible master/slave control board switchover function.

The forcible master/slave control board switchover function is enabled by default.

Format

slave switchover enable

slave switchover disable

undo slave switchover disable

Parameters

None

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
device-mgr write

Usage Guidelines

Usage Scenario

After the forcible master/slave control board switchover function is enabled, the slave switchover command can be run to manually perform a master/slave control board switchover.

Follow-up Procedure

Run the slave switchover command to manually perform a master/slave control board switchover.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the forcible master/slave control board switchover function.
<HUAWEI> system-view
[~HUAWEI] slave switchover enable
Parent Topic: FM Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >