stp config-digest-snoop (VSI-LDP-PW view)

Function

The stp config-digest-snoop command enables digest snooping.

The undo stp config-digest-snoop command disables digest snooping.

By default, digest snooping is disabled.

Format

stp config-digest-snoop

undo stp config-digest-snoop

Parameters

None

Views

VSI-LDP-PW view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mstp	write

Usage Guidelines

Usage Scenario

On a Multiple Spanning Tree Protocol (MSTP) network where Huawei and non-Huawei devices are interconnected, if the Huawei and non-Huawei devices have the same region name, revision level, and VLAN mapping table but different bridge protocol data unit (BPDU) keys, the two devices cannot communicate. To enable the two devices to communicate with each other, run the stp config-digest-snoop command.

Example

# Enable digest snooping on pw1.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi 1
[*HUAWEI-vsi-1] pwsignal ldp
[*HUAWEI-vsi-1-ldp] vsi-id 33
[*HUAWEI-vsi-1-ldp] peer 1.1.1.1
[*HUAWEI-vsi-1-ldp] peer 1.1.1.1 pw pw1
[*HUAWEI-vsi-1-ldp-pw-pw1] quit
[*HUAWEI-vsi-1-ldp] pw pw1
[*HUAWEI-vsi-1-ldp-pw-pw1] stp config-digest-snoop