dhcpv6 snooping bind-table autosave enable

Function

The dhcpv6 snooping bind-table autosave enable command enables automatic backup of DHCPv6 snooping binding entries.

The undo dhcpv6 snooping bind-table autosave enable command disables automatic backup of DHCPv6 snooping binding entries.

By default, automatic backup of DHCPv6 snooping binding entries is disabled.

Format

dhcpv6 snooping bind-table autosave enable

undo dhcpv6 snooping bind-table autosave enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

If DHCPv6 snooping is enabled globally and user binding entries exist, you can run the dhcpv6 snooping bind-table autosave enable command to enable automatic backup of DHCPv6 snooping binding entries if you need to restart the device without preventing the entries being lost.

Example

# Enable automatic backup of DHCPv6 snooping binding entries.

<HUAWEI> system-view
[~HUAWEI] dhcpv6 snooping enable
[*HUAWEI] dhcpv6 snooping bind-table autosave enable