te bandwidth dynamic bc0

Function

The te bandwidth dynamic bc0 command is used to set or modify the percentage of the BC dynamic bandwidth on the link to the maximum reservable bandwidth of the TE.

By default, the percentage of BC that can be reserved for the maximum TE is not configured.

Format

te bandwidth dynamic bc0 bc0-bw-percentage

Parameters

Parameter	Description	Value
bc0-bw-percentage	BC0 dynamic bandwidth value(%).	The value is a percent integer ranging from 1 to 100.

Parameter

Description

Value

bc0-bw-percentage

BC0 dynamic bandwidth value(%).

The value is a percent integer ranging from 1 to 100.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The te bandwidth dynamic bc0 command is used to set or modify the percentage of the BC dynamic bandwidth on the link to the maximum reservable bandwidth of the TE.

Precautions

This command is used for MPLS TE and SRv6 TE policy.

Example

# Set the dynamic bandwidth of BC to 50% of the maximum reservable bandwidth of TE.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
[*HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth max-reservable-bandwidth 100000
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth dynamic bc0 50