delay-measure one-way proactive receive enable

Function

The delay-measure one-way proactive receive enable command enables the receive end to receive DMMs from the transmit end for proactive one-way frame DM.

The undo delay-measure one-way proactive receive enable command disables the receive end from receiving DMMs from the transmit end for proactive one-way frame DM.

By default, the receive end is disabled from receiving DMMs from the transmit end for proactive one-way frame DM.

Format

delay-measure one-way proactive receive enable

undo delay-measure one-way proactive receive enable

Parameters

None

Views

Maintenance entity group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
tpoam	write

Usage Guidelines

Usage Scenario

To enable proactive one-way frame DM, run the delay-measure one-way proactive (MEG view) command on the transmit end. To enable the receive end to receive DMMs from the transmit end for proactive one-way frame DM, run the delay-measure one-way proactive receive enable command on the receive end.

Prerequisites

The ME of the MEG has been bound to a tunnel.

Example

# Enable the receive end in the MEG named test to receive DMMs from the transmit end for proactive one-way frame DM.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] interface GigabitEthernet 0/1/0.1
[*HUAWEI-GigabitEthernet0/1/0.1] vlan-type dot1q 1
[*HUAWEI-GigabitEthernet0/1/0.1] mpls static-l2vc destination 4.4.4.4 400 transmit-vpn-label 100 receive-vpn-label 200
[*HUAWEI-GigabitEthernet0/1/0.1] quit
[*HUAWEI] mpls-tp meg test
[*HUAWEI-mpls-tp-meg-test] me l2vc peer-ip 4.4.4.4 vc-id 400 vc-type vlan mep-id 1 remote-mep-id 2
[*HUAWEI-mpls-tp-meg-test] delay-measure one-way proactive receive enable