mpls te reoptimization (User view)

Function

The mpls te reoptimization command starts re-optimization for an MPLS TE tunnel.

By default, the Manual re-optimization is not configured.

mpls te reoptimization [ port-type port-num | TunnelName | auto-tunnel name auto-tunnel-name ]

Parameter	Description	Value
port-type	Interface type.	-
port-num	Interface number.	-
TunnelName	Specifies the name of a split tunnel.	The name is a string of 1 to 63 case-sensitive characters, spaces not supported.
auto-tunnel	Auto tunnel.	-
name	Tunnel name.	-
name auto-tunnel-name	Auto tunnel name.	The name is a string of 1 to 63 case-sensitive characters, spaces not supported.

User view

2: Configuration level

Task Name	Operations
mpls-te	execute

Usage Scenario

After the mpls te reoptimization command is run in the user view, all TE tunnels will be re-optimized immediately.

# Immediately re-optimize all the TE tunnels on the local device.

<HUAWEI> mpls te reoptimization