undo te srlg all-config

Function

The undo te srlg all-config command deletes the SRLG configuration from all interfaces on a TE node.

By default, the SRLG configuration is not deleted from any interfaces on a TE node.

undo te srlg all-config

None

System view

2: Configuration level

Task Name	Operations
mpls-te	write

Usage Scenario

After the undo te srlg all-config command is run on a TE node, the te srlg configuration is deleted from all interfaces on the node.

Precautions

MPLS TE-related commands apply only to MPLS TE and SR-MPLS TE. However, this command applies to SRv6 TE Policies, besides MPLS TE and SR-MPLS TE.

# Delete the SRLG configuration from all interfaces on a TE node.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
[*HUAWEI] undo te srlg all-config