remote-address (NQA view)

Function

The remote-address command configures a remote IP address.

The undo remote-address command deletes the remote IP address.

By default, no remote address is configured.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

remote-address ipv4 remote-ip-address

undo remote-address

undo remote-address ipv4 remote-ip-address

Parameters

Parameter	Description	Value
ipv4 remote-ip-address	Specifies the remotely assigned IP address.	It is in dotted decimal notation.

Parameter

Description

Value

ipv4 remote-ip-address

Specifies the remotely assigned IP address.

It is in dotted decimal notation.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

Use the remote-address command, you can specify a remote IP address.

NOTE:

Only VPLS PW ping test instances are supported.

Example

# Configure an IP address 1.1.1.1 for VPLS PW Ping test.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[~HUAWEI-nqa-user-test] test-type vplspwping
[~HUAWEI-nqa-user-test] remote-address ipv4 1.1.1.1