lsp-path full-display

Function

The lsp-path full-display command enables all devices, including Ps along an LSP to be displayed in an NQA test result.

The undo lsp-path full-display command removes the Ps along an LSP displayed in the NQA test result.

By default, you can view only PEs along an LSP in the NQA test result.

Format

lsp-path full-display

undo lsp-path full-display

Parameters

None

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

After an NQA VPLS PW trace test is carried out on an L2VPN with Ps, you can run the lsp-path full-display command to check the complete LSP in the test result.

Precautions

The lsp-path full-display command is applicable only to VPLS PW trace test instances. Therefore, the test type must be VPLS PW trace.

Example

# Display all devices, including Ps, along an LSP in the result of a VPLS PW trace test instance.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type vplspwtrace
[*HUAWEI-nqa-user-test] lsp-path full-display