aaa-said

Function

The aaa-said enable command enables the SAID function.

The aaa-said disable command disables the SAID function.

The undo aaa-said disable command enables the SAID function.

By default, the SAID function is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

aaa-said disable

aaa-said enable

undo aaa-said disable

Parameters

None

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

The SAID is used to identify typical faults and automatically diagnose and rectify the faults. The SAID function is enabled by default in typical BRAS scenarios. To disable the SAID function, run the aaa-said disable command. After the SAID function is enabled, the device periodically detects whether the number of online users or traffic rates are abnormal. When a large number of login failures or a sudden decrease in traffic is diagnosed and the time condition for self-healing is met, the system generates a log and determines whether to trigger self-healing (reset the subcard).

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the SAID function.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] aaa-said disable

# Enable the SAID function.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] undo aaa-said disable