aaa-said recover interval

Function

The aaa-said recover interval command sets an interval between two same SAID recovery operations.

The undo aaa-said recover interval command deletes an interval.

By default, the SAID fault recovery function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

aaa-said recover interval interval-time

undo aaa-said recover interval

Parameters

Parameter	Description	Value
interval interval-time	Specifies an interval between two same SAID recovery operations.	The value is an integer ranging from 1 to 180, in days.

Parameter

Description

Value

interval interval-time

Specifies an interval between two same SAID recovery operations.

The value is an integer ranging from 1 to 180, in days.

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

The SAID is used to identify typical faults and automatically diagnose and rectify the faults. The SAID fault recovery operations are added in typical BRAS scenarios. After faults are diagnosed, the SAID determines whether to perform self-healing and controls the impact of the recovery operations. To control the frequency for performing recovery operations, run the aaa-said recover interval command to set an interval so that the same recovery operation can be performed only once during the specified interval.

Configuration Impact

After faults are diagnosed, the SAID determines whether the conditions are met for performing fault recovery operations, which include master/backup switchovers and restart of boards. Before performing a recovery operation, the SAID checks whether the operation has been performed during the specified interval. If the operation has been performed, the SAID will not perform the operation again during the specified interval. If the operation has not been performed, the SAID will perform the recovery operation. The SAID recovery function is disabled by default, indicating that no recovery operation will be performed.

Precautions

In VS mode, this command is supported only by the admin VS.

The aaa-said recover interval command takes effect for only access-side users.

Example

# Delete an interval between two same SAID recovery operations.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] undo aaa-said recover interval

# Set the interval between two same SAID recovery operations to one day.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] aaa-said recover interval 1