access-line-id include

Function

The access-line-id include command configures the access-line-id information included in the RADIUS attributes, like Calling-Station-Id attribute, NAS-Port-Id or BB-Caller-Id attribute.

The undo access-line-id include command restores the default setting.

By default, when the access-line-id information is trusted, the RADIUS attributes includes only the link ID in the Option 82 information.

This command is supported only on the NetEngine 8000 F1A.

Format

access-line-id include { allvalue | { agent-circuit-id | agent-remote-id [ separator ] } ^* }

undo access-line-id include

Parameters

Parameter	Description	Value
allvalue	Indicates that all access-line-id information is contained in the RADIUS attributes.	-
agent-circuit-id	Indicates that the circuit ID is contained in the RADIUS attributes.	-
agent-remote-id	Indicates that the remote agent ID is contained in the RADIUS attributes.	-
separator	Specifies a separator between fields, in characters.	The value is a string of 1 to 1 case-sensitive characters, spaces not supported.

Views

BAS interface view (GE), BAS interface view (VE), BAS interface view (trunk)

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

The DSLAM sends the access-line-id information to the . The information identifies the physical location of the user. After being parsed on the , the information is carried in the RADIUS attribute and sent to the RADIUS server. The RADIUS server compares the information in the received RADIUS attribute with the physical location information stored in the database to verify if they are consistent.

The access-line-id include command is used to set the rule of parsing the access-line-id information.

Precautions

This command is supported only on the admin VS.

The functions of the access-line-id include command and the option82-relay-mode include command are the same. Both of them are used to configure the RADIUS attribute to carry the access-line-id information. If they have been both run more than once in the same view, the last configuration overrides the previous one.

Example

# Configure the NetEngine 8000 F to directly copy the value of agent-circuit-id attribute to the RADIUS attribute and send the attribute to the RADIUS server.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/2
[~HUAWEI-GigabitEthernet0/1/2] bas
[~HUAWEI-GigabitEthernet0/1/2-bas] access-line-id include agent-circuit-id