access-service

Function

The access-service command creates an access service template or displays the view of an access service template. If an access service template exists, the access service template view will be displayed after you run this command.

The undo access-service command removes an access service template.

By default, no access service template is created.

This command is supported only on the NetEngine 8000 F1A.

Format

access-service service-name

undo access-service service-name

Parameters

Parameter	Description	Value
service-name	Specifies the name of an access service template.	The name is a string of 1 to 32 case-insensitive characters.

Parameter

Description

Value

service-name

Specifies the name of an access service template.

The name is a string of 1 to 32 case-insensitive characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

If the RADIUS server sends a name of an access service template to implement the QoS function, you can run the access-service command to create an access service template.

Precautions

An access service template being used by an online user cannot be removed.

If the access service name sent by the RADIUS server does not exist, the user fails to be authenticated and cannot get online.

In VS mode, this command is supported only by the admin VS.

Example

# Create an access service template named huawei.

<HUAWEI> system-view
[~HUAWEI] access-service huawei