access-speed adjustment system-state threshold access-queue length

Function

The access-speed adjustment system-state threshold access-queue length command sets a size threshold for the UM message queue, so that the device can control the UM message queue usage. When the usage of the UM message queue reaches a specified threshold, the system decreases or increases the CPCAR value to control the number of user packets that can be sent to the CPU.

The undo access-speed adjustment system-state threshold access-queue length command restores the default setting.

By default, the size threshold for the UM message queue is 24 KB.

This command is supported only on the NetEngine 8000 F1A.

Format

access-speed adjustment system-state threshold access-queue length length-value

undo access-speed adjustment system-state threshold access-queue length length-value

Parameters

Parameter	Description	Value
length-value	Sets a size threshold for the UM message queue.	The value is an integer ranging from 1 to 48, in KB.

Parameter

Description

Value

length-value

Sets a size threshold for the UM message queue.

The value is an integer ranging from 1 to 48, in KB.

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

When a large number of users go online and the system CPU is busy, run the access-speed adjustment system-state threshold access-queue command to set a proper size threshold for the UM message queue (the size threshold serves as the denominator for queue usage calculation), so that the device can adjust the UM message queue usage to control the number of user packets that can be sent to the CPU, as well as the user access rate.

Example

# Set the size threshold to 32 KB for the UM message queue.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] access-speed adjustment system-state threshold access-queue length 32