access-speed cu adjustment system-state threshold cusp-queue-deep

Function

The access-speed cu adjustment system-state threshold cusp-queue-deep command configures the CUSP queue depth usage thresholds for decreasing and restoring the user access rate.

The undo access-speed cu adjustment system-state threshold command restores the default configuration.

By default, the CUSP queue depth usage thresholds for decreasing and restoring the user access rate are 3 and 2, respectively.

This command is supported only on the NetEngine 8000 F1A.

Format

access-speed cu adjustment system-state threshold cusp-queue-deep alarm alarm-threshold-value resume resume-threshold-value

undo access-speed cu adjustment system-state threshold

Parameters

Parameter	Description	Value
resume resume-threshold-value	Specifies an CUSP queue depth usage threshold for restoring the user access rate.	The value is an integer ranging from 1 to 100.
alarm alarm-threshold-value	Specifies an CUSP queue depth usage threshold for decreasing the user access rate.	The value is an integer ranging from 1 to 100.

Parameter

Description

Value

resume resume-threshold-value

Specifies an CUSP queue depth usage threshold for restoring the user access rate.

The value is an integer ranging from 1 to 100.

alarm alarm-threshold-value

Specifies an CUSP queue depth usage threshold for decreasing the user access rate.

The value is an integer ranging from 1 to 100.

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

In CU separation scenarios where the default CUSP queue depth usage threshold does not match the system's processing capability, to modify the default thresholds for decreasing and restoring the user access rate, run the access-speed cu adjustment system-state threshold cusp-queue-deep command.

Prerequisites

The CUSP has been configured on the CP. For details, see Configuring a CUSP controller (CP).

Example

# Configure the CUSP queue depth usage thresholds for decreasing and restoring the user access rate as 90 and 80, respectively.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] access-speed cu adjustment system-state threshold cusp-queue-deep alarm 90 resume 80