access-trigger loose infinite-lease(AAA view)

Function

The access-trigger loose infinite-lease command enables users with an infinite lease bound to the BAS interface to go online by sending IP/ARP packets when no abnormal logout backup entry is generated.

The undo access-trigger loose infinite-lease command disables users with an infinite lease bound to the BAS interface from going online by sending IP/ARP packets when no abnormal logout backup entry is generated.

By default, users with an infinite lease bound to the BAS interface cannot go online by sending IP/ARP packets when no abnormal logout backup entry is generated.

This command is supported only on the NetEngine 8000 F1A.

Format

access-trigger loose infinite-lease

undo access-trigger loose infinite-lease

Parameters

Parameter	Description	Value
loose	Indicates the loose mode for getting online after the system restarts.	-
infinite-lease	Indicates an infinite lease.	-

Parameter

Description

Value

loose

Indicates the loose mode for getting online after the system restarts.

infinite-lease

Indicates an infinite lease.

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa-access	debug

Usage Guidelines

Usage Scenario

To enable users with an infinite lease bound to the BAS interface to go online by sending IP/ARP packets when no abnormal logout backup entry is generated, run the access-trigger loose infinite-lease command.

Prerequisites

User access triggered by IP/ARP packets has been enabled on the BAS interface.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable users with an infinite lease to go online by sending IP/ARP packets when no abnormal logout backup entry is generated.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] access-trigger loose infinite-lease