access-user logout stop-accounting before authentication

Function

The access-user logout stop-accounting before authentication command enables a device to send Accounting-Stop packets for users in the authentication domain and then authenticate users in the pre-authentication domain during the user logout process.

The undo access-user logout stop-accounting before authentication command restores the default configuration.

By default, a device authenticates users in the pre-authentication domain before sending Accounting-Stop packets for users in the authentication domain during the user logout process.

This command is supported only on the NetEngine 8000 F1A.

Format

access-user logout stop-accounting before authentication

undo access-user logout stop-accounting before authentication

Parameters

None

Views

AAA view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

To enable a device to send Accounting-Stop packets for users in the authentication domain and then authenticate users in the pre-authentication domain during the user logout process, run the access-user logout stop-accounting before authentication command. The configuration reduces the accounting time error.

Example

# Enable the device to send Accounting-Stop packets for users in the authentication domain and then authenticate users in the pre-authentication domain during the user logout process.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] access-user logout stop-accounting before authentication